manualshive.com logo in svg

Ricoh Mv106, Operator'S Manual

Share
Download
Ricoh Mv106 Operator'S Manual Download Page 58

Replacing Toner Cassette 

When the Check Display indicator starts to blink and TONER LOW appears in
the display, the toner cassette is almost empty. You will be able to make
roughly 100 more copies before you have to replace it with a new cassette.
When ADD TONER appears in the display, it is time to install a new toner
cassette. 

WARNING:

Do not incinerate waste toner or depleted cassettes. Toner
dust might ignite suddenly if exposed to flames.

Caution: 

Lift the toner cartridge by the handle top.

Caution: 

Do not touch any parts other than those specified in the 
procedure.        

1

Squeeze in the release button on
the left of the machine and open
the cover.

2

Lift out the old toner cassette.

3

Shake the new toner cassette
from side to side before installing
it.

Put in the new toner cassette.
Make sure it drops in smoothly
and easily.

4

Close the cover firmly and pull
the copy output tray forward.

Replacing Toner Cassette 

MAINTAINING YOUR MACHINE

49

Summary of Contents for Mv106
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands