Ricoh Mv106, Operator'S Manual

Page: 15 / 111

6
Dial the number in one of the fol-
lowing ways.
75$160,7 <67$57
‹‹‹‹‹‹‹‹‹‹‹‹‹
a) Ten Key Pad b) Quick Dial c) Speed Dial d) Group
Example:
Method 1 *
Quick Dial key 08.
Method 2 **
Quick Dial key 10
and 1 on the ten
key pad.
If you install the handset, you can sent the message manually. Pick up
the handset and dial.
If you want to erase a digit of the phone number, press the Clear key.
If you want to erase the entire number, press the No key.
*: In this example Group Dial is programmed in Quick Dial 08.
**: In this example Quick Dial key 10 is programmed as the Group key, and
Group dial number 1 is programmed.
Programming Quick Dial: see page 21.
Programming Speed Dial: see page 21.
Programming Group Dial: see page 23.
Programming Group key: see page 25.
Note: The maximum destinations you can dial using the ten key pad is 49.
However, this limitation is also subject to memory capacity.
If you enter the wrong number,
press No or Clear and enter
again.
Press Clear to delete one digit.
Press No to delete the whole
number.
7
Press Yes to enter another num-
ber.
If you have only one destination,
press Start.
75$160,7 ',$/67$57
',$/ 1(;7 )$; 180%(5
8
Repeat steps 6 and 7 until all destinations are entered.
Example:
Speed Dial 10
Speed Dial
1 0
06 07
FAXING Memory Transmission and Immediate Transmission
8