Sending Scan Files by E-mail
24
1
Specifying the E-mail Sender
This section explains how to specify the e-mail sender.
To send e-mail, you must specify the name of the sender.
You can specify the e-mail sender by any of the following methods:
• Select the sender from the sender list
• Select the sender by entering the registration number
• Select the sender by searching the machine’s address book
Note
❒
Senders must be registered in advance under
[
System Settings
]
. For details, see
General Settings Guide.
❒
In
[
System Settings
]
, you can specify the Administrator's E-mail Address as the
default sender name. This lets you send e-mail without specifying the sender.
For details, see General Settings Guide.
❒
Depending on the security setting, the logged-on user may be specified as the
sender.
❒
When a protection code has been set, a screen for entering the protection code
appears after selecting the sender. Enter the protection code, and then press
[
OK
]
. If the protection code you entered is correct, the sender name is dis-
played.
Selecting a Sender from the List
This section explains how to select the sender from the machine’s sender list.
A
Press
[
Attach Sender's Name
]
.
Summary of Contents for MP 2590
Page 8: ...vi...
Page 140: ...Various Scan Settings 132 6...
Page 158: ...Operating Instructions Scanner Reference GB GB AE AE D313 6600...
