Drive Components
• Disconnect the power cord from the inlet of the buffer pass unit and unplug the mainframe before
starting the following procedure.
• Do not pull out the buffer pass unit drawer until this unit has been docked to the mainframe. Otherwise,
the buffer pass unit can fall down.
Drive Motor
1. Rear cover (
2. Controller board bracket (
3. Drive Motor [A] ( x 4,
x 1)
• There are two drive motors (right and left) in the buffer pass unit. The both removal procedures are
identical.
Drive Motor Base
Removing the Drive Motor Base
1. Rear cover (
2. Controller board bracket (
p.27 "Controller Board Bracket")
Drive Components
15
1
Summary of Contents for M379
