Ricoh M018, Service Manual

Page: 92 / 229

Electrical Components
M018/M019 4-46 SM
When installing the new EGB
1. Remove the EEPROM from the old EGB.
2. Install it on the new EGB with the mark [A] pointing to the left side of the board after you
replace the EGB.
3. Replace the EEPROM if the EEPROM on the old EGB is defective.
ƒ Keep the EEPROM away from any objects that can cause static electricity. Static
electricity can damage EEPROM data.
ƒ Make sure that the EEPROM is correctly installed on the EGB.
4.11.3 FCU
1. Rear cover ( p.4-3)
2. Controller box cover ( p.4-43 "Controller Board")
3. Controller bracket ( p.4-45 "EGB Engine Board")
4. FCU [A] ( x 4)