Ricoh M016, Service Manual

Page: 141 / 227

Firmware Updating
SM 5-29 M016/M017
Syste
m
Ma
in
te
na
n
ce
Ref
eren
ce
5.3.5 UPDATING FAILURE
If the firmware update is not successful, the update process is suspended and an error
message should display on the FW Update Tool screen. If this happens, DO NOT turn off
the machine, and execute the update procedure again (unless the error message
"Downloaded file is broken! Do NOT use print, scan, fax and copy function at the same
time." is displayed).
If power is turned off accidentally during a firmware update, the firmware will not be
correctly updated, and the machine may not start up normally. If the machine does not start
up normally, the controller firmware and/or the engine firmware will need to be updated
again.
When the machine does not start up normally, in most cases, the panel display will indicate
one of the following two conditions:
ƒ When attempting to restart the machine, the LCD panel display indicates "Initializing"
indefinitely.
In this case, the controller firmware update has failed. The controller firmware must be
updated again.
ƒ When attempting to restart the machine, the LCD panel display indicates "Please
Download Engine FW Again!"
In this case, the engine firmware update has failed. The engine firmware must be
updated again.