Ricoh M016, Service Manual

Page: 127 / 227

Service Program Mode
SM 5-15 M016/M017
Syste
m
Ma
in
te
na
n
ce
Ref
eren
ce
Fax Maintenance
Off-Hook Level
Sets the off-hook detection threshold.
[10V (Default)/ 15V/ 20V/ 25V 35V]
"Telephone" was indicated by malfunction when
receiving the fax message with some PABX.
Some PABX may output more than 25V to the
FAX input line. Selecting [35V] for [Off-hook
level] by the fax maintenance mode.
TX Settings
Redial Interval
Sets the redial interval when Tx fails.
[5 Min/ 6 Min]
Redialings
Sets the number of redials when Tx fails.
[2 times/ 3 Times/ 4 Times/ 5 Times]
Overseas Comm
Mode Settings
Overseas Comm
Mode
This sets the machine to ignore a DIS signal
sent from the called station once in a sending
operation.
[Off (Default)/ Ignore DIS Once]
Minimum Time
Length
If this setting is set to "On", the machine detects
the CNG signal after the line is connected. If it is
set to "Off", the machine detects the CNG signal
as long as the line is connected.
[100 Ms/ 200 Ms/ 300 Ms/ 400 Ms (Default)]
Dial Pulse Setting Dial Pulse Type
This sets the number of pulses that are
generated during dialing.
ƒ N: Dialing '0' generates 10 pulses ---
Dialing '9' generates 9 pulses.
ƒ N+1: Dialing '0' generates 1 pulses ---
Dialing '9' generates 10 pulses.
ƒ 10-N: Dialing '0' generates 10 pulses ---
Dialing '9' generates 1 pulse.