Ricoh M016 Service Manual Download Page 139

Page: 139 / 227

Firmware Updating

SM 5-27

M016/M017

Syste

Ref

eren

5.3.3 UPDATING THE ENGINE FIRMWARE

Procedure

When updating firmware, always disconnect any other cable(s) than the one being used for

the update operation.

(When updating firmware via USB cable, first disconnect any network and phone line

cables, and when updating firmware via LAN cable, first disconnect any USB and phone

line cables.)

1. Prepare:

USB cable or network cable

2. Download the firmware file to your computer.

3. Make a folder on a local drive of your computer and save the files there.

4. Connect a USB cable between your computer and the machine.

5. Click

the

"FWUpdateToolSP.exe"

file to execute the updating program.

6. The above updating program should appear on the screen.

Summary of Contents for M016




































































































































































































































Search results

Summary of Contents for M016

Reviews:

Ricoh M016, Service Manual, Page: 139 / 227

Search results

Summary of Contents for M016

Reviews: