Ricoh M000, Service Manual

Page: 90 / 138

Software (Errors, Symptoms, Causes and Solutions)
M000/M009 4-32 SM
4.5.2 PRINTER NOT WORKING (2)
Description:
After receiving a printing order, response is slow or nonexistent due to wrong setup rather
than a malfunction of the printer itself.
Symptom and Cause Solution
1. More hard disk space necessary.
2. Printing error occurs even if there is
enough space on the hard disk.
3. Check parallel-port-related items in the
CMOS Setup.
4. Reboot the system to print.
1. Not working with the message
'insufficient printer memory' indicates
an HDD space problem rather than a
RAM problem. In this case, provide
more space on the hard disk. Secure
more space using disk utilities, etc.
2. The connection of the cable and printer
port is not proper. Check if the
connection is properly done and if the
parallel port in CMOS is properly set
up.
3. As a printer port, Select ECP or SPP
out of SPP (Normal), ECP, and EPP
modes. SPP normal mode supports
8-bit data transfer, while ECP Mode
transfers 12-bit data.
4. If regular fonts are not printing, the
cable or the printer driver may be
defective.
5. Turn the PC and printer off, and reboot
the system to print again. If this doesn't
solve the problem, double-click the
printer icon in My Computer If regular
fonts are not printed taking this step,
then the cable may be defective, so try
replacing the cable with new one.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA