Ricoh InfoPrint XT, Installation And User Manual

Page: 163 / 202

InfoPrint XT created from a Xerox font, report this
message to your technical support representative.
AIOxxx766S The font processor could not find
character translation table table_name in
the reformatted Xerox resource path.
Explanation: InfoPrint XT did not locate the character
translation table identified in the message in the
reformatted Xerox resource path.
System action: The process fails.
User response:
If you manually updated the resource
correlation table, this can indicate a syntax error in the
correlation record. Make sure that the correlation record
is correct and rebuild the correlation table. Otherwise,
this indicates an internal error in InfoPrint XT. Report
this message to your technical support representative.
AIOxxx767E Font resource resource_name does not
contain a required character rotation.
Explanation: An AFP font resource is incomplete.
System action: InfoPrint XT cannot process the
resource.
User response: Reload the corresponding Xerox
resource.
AIOxxx768S The font processor could not find the
font correlation table in the reformatted
Xerox resource path, or the table
contains no entries.
Explanation: InfoPrint XT did not locate any font
correlation in the reformatted Xerox resource path.
System action: The process fails.
User response:
Make sure that you load at least one
font. Then, enter the command or do the task again.
AIOxxx769E Character ID character_id (EBCDIC code
point x’ EBCDIC_hex ’) in code page
code_page is not in character set
character_set . The original Xerox font was
font_name , correlated to coded font
coded_font .
AIOxxx769E Character ID character_id (EBCDIC code
point x’ EBCDIC_hex ’) in code page
code_page is not in character set
character_set
. The original Xerox font was
font_name .
Explanation: Code page code_page and character set
character_set do not match for character ID character_id .
System action: The process fails.
User response: If you manually updated the resource
correlation table, you have specified an incompatible
code page and character set. Correct the correlation
record and rebuild the correlation table. Then, reconvert
the job. Otherwise, if the font was supplied by
InfoPrint Solutions Company or if it is a font that
InfoPrint XT created from a Xerox font, report this
message to your technical support representative.
AIOxxx770S A resource processor could not find
reformatted JDL name in the reformatted
Xerox resource path.
Explanation:
InfoPrint XT cannot locate the JDL
specified in the message.
System action: The process fails.
User response: Make sure that you specify the correct
location for the JDL resource when you submit the job.
Also make sure that you have loaded the JDL on the
system. Make sure that you have spelled the name of
the JDL correctly. The name is case-sensitive. After
correcting the problem, submit the job again.
AIOxxx771S A resource processor could not find JDE
jde_name in the reformatted jdl_name
JDL.
Explanation:
The program did not find JDE jde_name
in JDL jdl_name .
System action: The process fails.
User response: Make sure that the JDE and JDL
names are correct and spelled correctly. Make sure that
the correct version of the JDL was loaded on the
InfoPrint XT system in the common resource library or
in a resource group available to the job. Then, reconvert
the job.
AIOxxx772E A resource processor could not find
cl_type
cluster name
cl_name
in
reformatted cluster database clb_name
during processing of STOCKSET
internal to JDL jdl_name /JDE jde_name .
AIOxxx772E A resource processor could not find
cl_type cluster name cl_name in
reformatted cluster database clb_name
during processing of external
STOCKSET stk_name in JDL
jdl_name /JDE jde_name .
Explanation: The STOCKSET that InfoPrint XT was
processing refers to a cluster entry, cl_name , which does
not exist in cluster database clb_name . cl_type can be
INIFEED, SYSPAGE, or ASSIGN.
System action: The process fails.
User response: Verify that the job specifies the correct
STOCKSET and that the xclb conversion parameter
specifies the correct cluster database. Then, reconvert
the job.
Appendix D. Resource utility messages and data stream converter messages: AIO xxxnnnx
143
|