Ricoh infoprint 1222 Service Manual Download Page 77

Page: 77 / 203

2-42

Service Manual

Infoprint 1222

Paper Never Picks

FRU

Action

Paper Tray

Make sure the paper tray and paper
are correctly positioned.

Check the input tray for missing or
broken parts.

Replace the tray as necessary.

Paper Feed Solenoid
RIP Card Assembly

Make sure solenoid is installed
correctly and its cable is plugged into
the RIP card assembly. See

“Locations” on page 5-1

for more

information.

• Verify approximately 40 ohms in

the solenoid. If not correct,
replace the solenoid.

• Verify the solenoid has the spring

in place and functions
mechanically. If this is true and the
resistance is correct, replace the
RIP card assembly.

Note:

Always check

printhead alignment after
replacing the RIP card
assembly. See

“Printhead

Assembly Adjustment” on
page 4-2

for hardware

alignment of the printhead.

Summary of Contents for infoprint 1222












































































































































































































Search results

Summary of Contents for infoprint 1222

Reviews:

Related manuals for infoprint 1222

Brands by name

Popular brands

Ricoh infoprint 1222, Service Manual

Search results

Summary of Contents for infoprint 1222

Reviews:

Related manuals for infoprint 1222

Brands by name

Popular brands