Ricoh infoprint 1222 Service Manual Download Page 141

Page: 141 / 203

4-38

Service Manual

Infoprint 1222

RIP Card Cage (with card in place) Removal

1. Remove the left side cover. See

“Left Side Cover Removal”

on page 4-12

for more information.

2. Loosen the six screws in the controller cage cover and slide the

cover off.

3. Remove the top cover. See

“Top Cover Assembly Removal”

on page 4-6

for more information.

4. Disconnect all cables from the RIP card assembly.

5. Remove the inner cover. See

“Left Side Cover Removal” on

page 4-12

for more information.

6. Remove the four screws in the RIP card.

7. Gently pull the bottom of the cage out and lift up off the two

posts at the top.

8. Disconnect all cables from the RIP card assembly.

Summary of Contents for infoprint 1222












































































































































































































Search results

Summary of Contents for infoprint 1222

Reviews:

Related manuals for infoprint 1222

Brands by name

Popular brands

Ricoh infoprint 1222, Service Manual

Search results

Summary of Contents for infoprint 1222

Reviews:

Related manuals for infoprint 1222

Brands by name

Popular brands