Ricoh imagio MP 6001 series, Aficio MP 9001 Series Manual Download Page 62

Page: 62 / 83

Page 61 of 82

O.GENUINE

Protection of integrity of MFP Control Software integrity

Following are the rationale behind the functional requirements corresponding to O.GENUINE in Table 23,

and these requirements are included to fulfil the O.GENUINE specification.

Check the integrity of the MFP Control Software

To fulfil O.GENUINE, the integrity of the MFP Control Software shall be verified. For this,

FPT_TST.1 tests the integrity of the executable code of the MFP Control Software, and verifies its

integrity at TOE start-up.

O.LINE_PROTECT

Protection from intrusion via telephone line

Following are the rationale behind the functional requirements corresponding to O.LINE.PROTECT in

Table 23, and these requirements are included to fulfil the O.LINE.PROTECT specification.

Prohibit intrusion via the fax line.

To fulfil O.LINE_PROTECT, unauthorised access by an attacker to the TOE via telephone line shall

be prevented.

For this, FDP_IFC.1 and FDP_IFF.1 allow fax data to pass from the fax process on the Fax Unit to the

fax reception process on the Controller Board only if the data received from the telephone line is fax

data.

6.3.3

Dependency Analysis

Table 24 shows the correspondence of dependencies in this ST for the TOE security functional

requirements.

Table 24: Correspondence of dependencies of TOE security functional requirements

TOE security

functional

requirements

Dependencies

claimed by CC

Dependencies

satisfied in ST

Dependencies not

satisfied in ST

FAU_GEN.1

FPT_STM.1

None

FAU_SAR.1

FAU_GEN.1

None

FAU_SAR.2

FAU_SAR.1

None

FAU_STG.1

FAU_GEN.1

None

FAU_STG.4

FAU_STG.1

None

FCS_CKM.1

[FCS_CKM.2 or
FCS_COP.1]

FCS_CKM.4

FCS_COP.1

FCS_CKM.4

FCS_COP.1

[FDP_ITC.1 or
FDP_ITC.2 or
FCS_CKM.1]

FCS_CKM.4

FCS_CKM.1

FCS_CKM.4

FDP_ACC.1

FDP_ACF.1

None

FDP_ACF.1

FDP_ACC.1

FMT_MSA.3

FDP_ACC.1

FMT_MSA.3

None

Summary of Contents for imagio MP 6001 series, Aficio MP 9001 Series


















































































Search results

Summary of Contents for imagio MP 6001 series, Aficio MP 9001 Series

Reviews:

Related manuals for imagio MP 6001 series, Aficio MP 9001 Series

Brands by name

Popular brands

Ricoh imagio MP 6001 series, Aficio MP 9001 Series, Manual

Search results

Summary of Contents for imagio MP 6001 series, Aficio MP 9001 Series

Reviews:

Related manuals for imagio MP 6001 series, Aficio MP 9001 Series

Brands by name

Popular brands