Ricoh GR DIGITAL IV User Manual Download Page 20

Page: 20 / 181

irst

time

ser

? r

ead

this

First Steps

Prepare the camera for use.

Charging the Battery

The rechargeable battery supplied with the camera is not

charged at shipment. Charge the battery in the supplied

BJ-6 battery charger before use.

Place the battery in the charger.

Place the battery label up

with the “+” and “–” labels ori-

ented to match the labels on

the charger.

Caution

• Be sure the battery is in the cor

rect orientation.

Plug the charger in.

The charger lamp will light

while the battery charges.

Note

• An exhausted battery will be fully charged in about two and

a half hours at 25 °C.

• If the charger lamp blinks, a battery or charger fault may

have occurred. Unplug the charger and remove the battery.

• Charging is complete when the charger lamp turns off.

Remove the battery.

Summary of Contents for GR DIGITAL IV






















































































































































































Search results

Summary of Contents for GR DIGITAL IV

Reviews:

Related manuals for GR DIGITAL IV

Brands by name

Popular brands

Ricoh GR DIGITAL IV, User Manual

Search results

Summary of Contents for GR DIGITAL IV

Reviews:

Related manuals for GR DIGITAL IV

Brands by name

Popular brands