116
t
he
s
etu
P
m
enu
Tip: Naming My Settings
• Select
Name
in Step 3 to rename the
current setting. The current name is
highlighted in the name area; to edit
the current name, press
#
or
$
to
position the cursor in the name area
and press
"
to place the cursor in the
keyboard area (to delete the current
name, press
"
while the name is high-
lighted). Highlight characters using
!
,
"
,
#
, or
$
and press
C
/
D
to enter the highlighted char-
acter at the current cursor position (to delete the character at
the current cursor position, select
[Delete]
). Press
Fn2
to switch
between upper and lower case. Names can be up to 32 charac
-
ters long. Press the
ADJ.
lever in to use the new name, or press the
DISP.
button to exit without renaming the settings.
Note
• When the settings registered in
Reg. My Settings
are assigned
to
MY1
,
MY2
, or
MY3
, if editing the settings in
Edit My Settings
, the
changes are reflected to the settings assigned to
MY1
,
MY2
, or
MY3
.
If editing the assigned settings directly in the
MY1
,
MY2
, or
MY3
mode, the changes are not reflected to the settings registered
in
Reg. My Settings
. After changing the settings directly in the
MY1
,
MY2
, or
MY3
mode, the settings edited in
Edit My Settings
will not be reflected to the settings assigned to
MY1
,
MY2
, or
MY3
.
• Names assigned to “My” settings are
displayed immediately after the mode
dial is rotated to
MY1
,
MY2
, or
MY3
or
when
!
is pressed.
• My Settings can be deleted in
Delete
My Settings
in key custom settings
(page 122).
AUTO
4:3 N
10
M
9999
2011/01/01/00:20 Set
Name area
Keyboard area
