Ricoh G184 Page 246 Service Manual Download

Page: 246 / 300

Image Transfer

G165/G166/G167/G181/G183/G184 6-38

6.6.7 WASTE TONER COLLECTION

The waste toner collection coil [A] moves collected waste toner from the ITB (image

transfer belt) unit to the entrance [B] of the waste toner bottle. The agitator plate [C] levels

the collected waste toner in the waste toner bottle. It is driven by the agitator motor [D].

The waste toner bottle set sensor [E] detects whether the waste toner bottle is set. If it is

not set, "Waste Toner Bottle" appears on the SOM (printer model) or LCD on the machine

(MF model).

The waste toner overflow sensor [F] detects whether the waste toner bottle is full. If it is full,

"Replace the Waste Toner Bottle" appears on the SOM (printer model) or LCD on the

machine (MF model), 400 more pages can be printed, then the machine stops.

CÓPIA NÃO CONTROLADA

Summary of Contents for G184













































































































































































































































































































Search results

Summary of Contents for G184

Reviews:

Related manuals for G184

Brands by name

Popular brands

Ricoh G184, Service Manual

Search results

Summary of Contents for G184

Reviews:

Related manuals for G184

Brands by name

Popular brands