Ricoh G184, Service Manual

Page: 193 / 300

Service Menu (MF Model)
SM 5-45 G165/G166/G167/G181/G183/G184
Service
Ta
bles
Dial Pulse Setting Dial Pulse Type
This sets the number of pulses that are generated
during dialing.
ƒ
N: Dialing '0' generates 10 pulses --- Dialing '9'
generates 9 pulses.
ƒ N+1: Dialing '0' generates 1 pulse --- Dialing
'9' generates 10 pulses.
ƒ 10-N: Dialing '0' generates 10 pulses ---
Dialing '9' generates 1 pulse.
Tone Signal
Transmission
Time Length
Sets the tone signal transmission time length
[100 ms (Default)]
Minimum Pause
In Tone Dialing
Sets the minimum pause during tone dialing
[100 ms (Default)/ 150 ms/ 200 ms]
Attenuator For
Pseudo Ring
Back tone To
the Line
Sets the attenuator for pseudo ring back tone to
the line
[0 to 15 / 10 (Default)/ 1 dB/step]
DTMF Level
Sets the transmission level of DTMF tones.
[-12 dBu / -11 dBu/ -10 dBu/ -8 dBu/ -6 dBu]
Tone Signal
Settings
DTMF Delta
Sets the level difference between high band
frequency signals and low band frequency signals
when sending DTMF tones.
[2 dBu/ 3 dBu]
1Dial Tone
Detection
Wait Time
The machine starts dialing after the specified
interval without detection of a dial tone when
Dial tone detection is set to "No detection.”
[3.5 Sec (Default)/ 7.0 Sec/ 10.5 Sec
/ 14.0 Sec]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA