Ricoh G184, Service Manual

Page: 195 / 300

Service Menu (MF Model)
SM 5-47 G165/G166/G167/G181/G183/G184
Service
Ta
bles
Equalizer
These selectors set the equalizer's training level to
be applied if training fails due to poor line
connection.
[Automatic (Default)/ 4 Points/ 16 Points]
Redialing
Resend when a communication error occurs.
[Disabled (Default)/ Not Disabled]
First TX Speed
Sets the first transmission speed choice, before
fallback.
[2400 Bps/ 4800 Bps/ 7200 Bps/ 9600 Bps
/ 12000 Bps/ 14400 Bps/ 16800 Bps/ 19200 Bps/
21600 Bps/ 24000 Bps/ 26400 Bps/ 28800 Bps/
31200 Bps/ 33600 Bps (Default)]
V34 Settings
Symbol Rate
This setting limits the transmission speed range in
V.34 mode by masking the desired symbol rate(s).
[Not Used (Default)/ 3429 Sym/Sec
/ 3200 Sym/Sec/ 3000 Sym/Sec
/ 2800 Sym/Sec/ 2400 Sym/Sec]
Reseller Default
Not Execute Does not reset anything. Returns to the upper level.
Execute
Resets all the settings to the factory defaults except the following.
ƒ Counter for Machine Life
After executing, the initial setup menu starts after the next power-on.
IMPORTANT: See NOTE on the next page.
Rev. 07/05/2009
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA