Ricoh FAX1400L Advanced Features Download Page 77

Page: 77 / 88

Specifications

Document and Paper Specifications

Recommended types of document

Before you send your document, make sure that it meets the following require-
ments.

Important

❒

Documents that do not meet these requirements can cause your machine to
jam or may cause some components of the machine to become damaged or
dirty.

❖

Scanning area

The part shaded will not be scanned, because it is outside the maximum scan-
ning width range.

Correct size for the Automatic Document Feeder

• Thickness 0.05 to 0.2 mm (60g/m

–90g/m

)

• Length and Width: See the above diagram.

If the page is too short, put it inside a document carrier or enlarge it with a
copier.
If the page is too long, divide it into two or more sheets.

Holsten1AE_Advanced_FM.book Page 65 Wednesday, November 8, 2000 11:24 AM

Summary of Contents for FAX1400L

























































































Search results

Summary of Contents for FAX1400L

Reviews:

Related manuals for FAX1400L

Brands by name

Popular brands

Ricoh FAX1400L, Advanced Features

Search results

Summary of Contents for FAX1400L

Reviews:

Related manuals for FAX1400L

Brands by name

Popular brands