Ricoh DX 3243 Page 75 Operating Instructions Manual Download

Page: 75 / 144

Make Colour Prints

Make Colour Prints

Colour drum units (red, blue, green,
brown, yellow, purple, navy, ma-
roon, orange and teal) are available as
options in addition to the standard
black unit. For making colour prints,
a separate drum unit is necessary for
each colour.

Changing the Colour Drum Unit

Open the front cover.

Pull out the drum unit handle.

Note

❒

If you cannot pull out the drum
unit, push the drum unit han-
dle, then pull out the drum unit.

Hold the rail on the drum and
slide out the drum while pulling
the release towards you.

Remove the drum unit from the
machine while holding the upper
drum stay.

Note

❒

Be careful not to let the drum
unit fall.

ANT114S

ANT057S

ANT052S

ANT047

ANT048S

Summary of Contents for DX 3243
















































































































































Search results

Summary of Contents for DX 3243

Reviews:

Related manuals for DX 3243

Brands by name

Popular brands

Ricoh DX 3243, Operating Instructions Manual

Search results

Summary of Contents for DX 3243

Reviews:

Related manuals for DX 3243

Brands by name

Popular brands