Ricoh DX 3243 Page 11 Operating Instructions Manual Download

Page: 11 / 144

Safety Information

When using this machine, the following safety precautions should always be fol-
lowed.

Safety During Operation

In this manual, the following important symbols are used:

WARNING:

Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not
followed, may result in minor or moderate injury or damage to property.

•

Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.

•

Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.

•

To avoid hazardous electric shock, do not remove any covers or
screws other than those specified in this manual.

•

Turn off the power and disconnect the power plug (by pulling the plug,
not the cable) if any of the following occurs:

•

You spill something into the machine.

•

You suspect that your machine needs service or repair.

•

The external housing of your machine has been damaged.

•

Keep the machine away from flammable liquids, gases, and aerosols.
A fire or an electric shock might occur.

•

Connect the power cord directly into a wall outlet and never use an ex-
tension cord.

•

Only connect the machine to the power source described in this man-
ual.

•

Disposal can take place at our authorized dealer or at appropriate col-
lection sites.

Summary of Contents for DX 3243
















































































































































Search results

Summary of Contents for DX 3243

Reviews:

Related manuals for DX 3243

Brands by name

Popular brands

Ricoh DX 3243, Operating Instructions Manual

Search results

Summary of Contents for DX 3243

Reviews:

Related manuals for DX 3243

Brands by name

Popular brands