Ricoh DX 3243 Page 89 Operating Instructions Manual Download

Page: 89 / 144

Placing a New Roll of Tape in the Tape Dispenser (Optional)

Placing a New Roll of Tape in the Tape
Dispenser (Optional)

Note

❒

Make sure that the main switch is
turned on and the power switch of
the tape dispenser is off.

Open the cover of the tape dis-
penser.

As shown, put the roll in the dis-
penser.

Note

❒

Make sure that the tape is in-
stalled in the proper direction. If
it is not in the correct direction,
the tape dispenser will not work
correctly.

Feed the leading edge of the roll in
the dispensing slot until it stops.

Note

❒

Push the tape as far as possible
through the slot.

Turn on the power switch of the
tape dispenser.

Press the manual cut button to trim
off the leading edge of the tape.

TSLP010E

TSLP011E

TSLP012E

TSLP013E

Off

TSLP014E

Summary of Contents for DX 3243
















































































































































Search results

Summary of Contents for DX 3243

Reviews:

Related manuals for DX 3243

Brands by name

Popular brands

Ricoh DX 3243, Operating Instructions Manual

Search results

Summary of Contents for DX 3243

Reviews:

Related manuals for DX 3243

Brands by name

Popular brands