Ricoh DDST A, DDST Operating Instructions Manual Download

Page: 40 / 56

Troubleshooting

❖

Alert messages

Messages/Second messages

Causes

Solutions

Change Tray # to the follow-
ing settings:

xxx yyy

The settings of the selected pa-
per tray are different from
those specified for printing.

# indicates the tray number.

xxx indicates the tray number.

yyy indicates the paper size.

Press

[

JobReset

]

to change the

paper tray settings, or press

[

FormFeed

]

to print regardless.

For details about the paper
tray settings, see

General Set-

tings Guide

Collate cancelled.

The collate print function has
been canceled.

Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.

Collate: Page max.

The maximum number of pages
has been exceeded for collation.

Turn off the main power
switch, and back on again. Re-
duce the number of pages to
be printed, or, increase memo-
ry capacity.

When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.

Duplex cancelled.

Duplex printing has been can-
celed.

Check the paper used is suita-
ble for duplex printing, or, in-
crease memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.

Duplex mode is in off posi-
tion for Tray #

The selected paper tray has
not been configured for du-
plex printing.

# indicates the tray number.

Press

[

JobReset

]

to change the

paper tray settings, or do sin-
gle-sided printing.

For details about the tray set-
tings, see

General Settings Guide

Ethernet Board Error

An error has occurred in the
Ethernet interface.

Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.

Exceeded max. print size.

Press FormFeed/JobReset.

The page images to be printed
exceed the maximum print area.

Press

[

JobReset

]

to change the

paper tray settings, or press

[

FormFeed

]

to print regardless.

I/O buffer overflow

The maximum size of the I/O
buffer has been exceeded.

Increase the size of the I/O
buffer through the Host Inter-
face menu.

Load paper in Tray #

There is no paper in the select-
ed paper tray.

# indicates the tray number.

Load the tray with paper.

Summary of Contents for DDST A, DDST

























































Search results

Summary of Contents for DDST A, DDST

Reviews:

Related manuals for DDST A, DDST

Brands by name

Popular brands

Ricoh DDST A, DDST, Operating Instructions Manual

Search results

Summary of Contents for DDST A, DDST

Reviews:

Related manuals for DDST A, DDST

Brands by name

Popular brands