T
echnical
B
ulletin
PAGE: 4/7
Reissued:5-Dec-13
Model:
Large Capacity Tray RT5060 (D516)
Date:
6-Nov-13
No.:
RD516005
3-2) Insert a tool approximately 3mm wide in between the retraction arm (white
part) and the ball-bearings from the bottom so that the bearings shift to the
rear.
3-3) Slightly lift up the retraction arm (white part), insert the pin and fix the pin with
the E-ring.
4. Insert the 300gsm paper supplied for the rework (or thickest paper in use by the
customer) in the guide plate and move the paper sideways to check if the paper slides
smoothly without any resistance.
¾
If no resistance, complete the procedure.
¾
If any resistance, go to Step 5.
Slide in a tool with a diameter of approx 3mm, for
example, a screwdriver.
Pin can be inserted from either right or left.
