Ricoh D454-17, Manual

Page: 113 / 164

Skew Correction Reference Table
L1 L2 L3 S1 S2 S3
FM1 --- F Long F Long --- Lower F Raise F
--- F Short F Short --- Raise F Lower F
FM2 F Long --- --- Raise F --- ---
F Short --- --- Lower F --- ---
FM3 F Long F Long --- Raise F Lower F ---
F Short F Short --- Lower F Raise F ---
FM4 F Long F Long --- Raise F Lower F ---
F Short F Short --- Lower F Raise F ---
FM5 F Long F Long --- Raise F Lower F ---
F Short F Short --- Lower F Raise F ---
FM6 F Long F Long F Long Lower F Lower F Raise F
F Short F Short F Short Raise F Raise F Lower F
Table Key
You must refer to the "Skew Correction Reference Diagrams". The following abbreviations are used in the
table above.
Term What It Means
F Long Front measurement of L1, L2, or L3 is longer than Rear..
F Short Front measurement of L1, L2, or L3 is shorter than Rear..
S1, S2, S3 Refers to Stopper 1, Stopper 2, Stopper. In the diagrams these are annotated as:
¬
,
Á
,
®
respectively.
Raise F Raise the front end of the stopper fence. For more, see below.
Lower F Lower the front end of the stopper fence. For more, see below.
Example: FM1 (Z-fold)
Skew Adjustment
111
1