78
OR-C2 Training
Slide 78
Shift Tray – Side-to-side Mechanism
Shift motor: Moves the shift roller from side to side, after
the paper eject sensor detects the trailing edge of the
paper
After the sheet is fed out, the shift roller moves back to
home position
Detected by the shift HP sensor
Shift
Motor
Shift HP
Sensor
Paper Eject
Sensor
Shift Roller
This is basically the same as the B793 finisher.
The shift roller moves the sheet to one side while it is fed out.
All sheets of the same set are moved across to the same side, one at a time.
Then, for the next set, the shift roller moves in the opposite direction.
The shift roller goes back to home position after it feeds out each page.
Home position is in the middle.
In shift mode, if the set is one sheet, the motor moves every sheet. In this case,
the output speed of the finisher is reduced to 60%.
