manualshive.com logo in svg

Ricoh Aficio MP 6002, User Manual, Page: 51 / 232

Share
Download
Ricoh Aficio MP 6002 User Manual Download Page 51

Placing Originals

Placing Originals on the Exposure Glass

• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.

1.

Lift the ADF.

Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be
detected correctly.

2.

Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.

Start with the first page to be scanned.

1

1

CJW111

1. Positioning mark

3.

Lower the ADF.

Placing Originals in the Auto Document Feeder

Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect
the size of the original incorrectly or display a paper misfeed message. Also, be sure not to place
originals or other objects on the top cover. Doing so may cause a malfunction.

Placing Originals

49

Summary of Contents for Aficio MP 6002









































































































































































































































Reviews:

No comments