manualshive.com logo in svg

Ricoh Aficio MP 6002, User Manual

Share
Download
Ricoh Aficio MP 6002 User Manual Download Page 189

Message

Causes

Solutions

"Hardware Problem:
Wireless Card"
(A "wireless LAN board" or
"Bluetooth interface unit" is
referred to as a "wireless
card".)

• The Bluetooth interface

unit was connected
while the machine was
turned on.

• The Bluetooth interface

unit was removed while
the machine was turned
on.

Turn off the main power switch, and
then confirm the Bluetooth interface unit
is inserted correctly. And then, turn on
the main power switch again. If the
message appears again, contact your
service representative.

"Load following paper in n.
To cancel job, press [Job
Reset]."
(A figure is placed at n.)

The printer driver settings are
incorrect or the tray does not
contain paper of the size
selected in the printer driver.

Check that the printer driver settings
are correct, and then load paper of the
size selected in the printer driver into
the input tray. For details about how to
change the paper size, see "Changing
the Paper Size", Paper Specifications
and Adding Paper .

"Paper size and type are
mismatched. Select another
tray from the following and
press [Continue]. To cancel
job, press [Job Reset]. Paper
size and type can also be
changed in User Tools."

The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.

• Check that the printer driver

settings are correct, and then load
paper of the size selected in the
printer driver into the input tray.
For details about how to change
the paper size, see "Changing the
Paper Size", Paper Specifications
and Adding Paper .

• Select the tray manually to

continue printing, or cancel a
print job. For details about how to
select the tray manually, or cancel
a print job, see "If an Error Occurs
with the Specified Paper Size and
Type", Print .

"Paper size of n is
mismatched. Select another
tray from the following and
press [Continue]. Paper type
can also be changed in User
Tools."
(A tray name is placed at n.)

The size of the paper in the
tray does not match the
paper size specified in the
printer driver.

Select a tray containing paper that is
the same size as the specified paper
size.

When Messages Are Displayed on the Control Panel

187

Summary of Contents for Aficio MP 6002









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands