Ricoh Aficio CL4000DN, Setup Manual

Page: 41 / 88

Attaching Paper Feed Unit Type 4000
37
3
Attaching Paper Feed Unit Type 4000
Preparation
When installing multiple options,
install the paper feed unit first.
R
CAUTION:
R
CAUTION:
Important
❒
Up to two paper feed units can be
attached to the printer.
❒
When two paper feed units are in-
stalled, they are identified as “Tray
2” and “Tray 3” starting from the
upper unit.
❒
Before using the new Paper Feed
Unit, you must make settings in
the printer driver.
❒
Check the printer nameplate to
confirm the model code.
A
Check the package contains the
following:
❖
Paper Feed Unit
(including a paper tray)
B
Turn off the power, and then un-
plug the power cable.
C
Remove the orange fastening
tapes from the paper feed unit.
D
Lift the printer using the inset
grips on both sides of the printer.
Important
❒
The printer should always be
lifted by at least two people.
• The printer weights approxi-
mately 50 kg (110.3 lb.). When
moving the printer, use the inset
grips on both sides, and lift slow-
ly. The printer will break or cause
injury if dropped.
• Lifting the paper feed unit care-
lessly or dropping it may cause
injury.
AET108S
AET022S
GaiaP1GB_Setup-F4_FM_forPaper.book Page 37 Friday, June 3, 2005 7:50 AM