Ricoh Aficio CL3000 Page 622 Maintenance Manual Download

Page: 622 / 691

Operating Instructions

Client Reference

179

❖

What can it do?

SmartNetMonitor for Admin

•

Device Information function

•

Checks the printer's network settings and detailed information of devices.

•

Checks the number of pages printed for each computer, using the user codes.

•

Checks the results of print jobs executed from the computer.

•

Enables you to change the printer's network settings.

•

Device Settings function

•

Limits the settings to be done from the control panel, and disables changes to be made to some
of the items.

•

Enables the selection of paper type loaded in the printer.

•

Energy Saver function

•

Switches to the Energy Saver mode, and wakes up from the Energy Saver mode.

Microsoft Windows XP

TCP/IP provided with Windows XP

IPX/SPX provided with Windows XP

NetWare Client provided with Windows XP

Novell Client for Windows XP

Microsoft Windows NT 4.0

TCP/IP provided with Windows NT

IPX/SPX provided with Windows NT

NetBEUI provided with Windows NT

Client Service for NetWare provided with Windows NT

Novell Client for Windows NT/2000

Protocol Stack

Summary of Contents for Aficio CL3000

















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio CL3000

Reviews:

Related manuals for Aficio CL3000

Brands by name

Popular brands

Ricoh Aficio CL3000, Maintenance Manual

Search results

Summary of Contents for Aficio CL3000

Reviews:

Related manuals for Aficio CL3000

Brands by name

Popular brands