Ricoh A212, Service Manual

Page: 59 / 92

Mode No. Function Settings
•
°5-305-001
Auto Shut Off
Time Setting † Selects the auto shut off time in
one-minute steps. NA version
1 ~ 120
Default = 60
Other versions
1 ~ 999
Default = 60
The copier main switch is shut off
automatically after the selected auto shut
off time if SP5-305-002 is set to 0.
•
°5-305-002
Auto Shut Off
Selection † Selects the "Automatic Shut Off" mode. 0: YES
1: NO
Default = 0
(NA)
Default = 1
(Others)
The copier automatically shuts itself off
at the auto shut off time selected
(SP5-305-001).
°5-401
User Code
Mode † After JP101 on the main board is cut,
either key counter mode or user code
mode can be selected with this SP mode. 0: Key Counter
1: User Code
•
°5-402
User Code
Counter Check
† Displays the user code counters.
The current user code is displayed in
copy counter, and the copy count for that
user code is displayed in the
reduce/enlarge indicator. Hold down the
"
•
" key to display the last three digits.
Use the
9
and
:
keys to check each
user code counter.
•
°5-404-001
to
5-404-002
User Code
Counter Clear † Resets the user code counters.
SP5-404-001: Resets the counter for the
user code that is now
displayed in the
reduce/enlarge indicator.
SP5-404-002: Resets all the UC counters.
To reset the counter(s),
press the
%
key.
SP5-404-001: The user code must be
input at the numeric keys
before it can be displayed
and the counter reset, so
you must know what user
codes are in use. Take a
look with SP5-405.
•
°5-405
User Code
Number Setting
† Use this mode to input the user code
numbers (max. 3 digits). 1 ~ 999
(max. 50 codes)
Up to 50 user codes can be set. To input
a code, enter it at the numeric keys then
press the
%
key. Then you can input
another. To check the user codes input
so far, use the
9
and
:
keys. The user
codes input will be displayed in
reduce/enlarge counter.
SERVICE PROGRAM MODE 13 October 1997
56