12. SERVICE PROGRAM MODE
12.1 SERVICE PROGRAM MODE TABLE
1. Items written in
bold italic letters are newly added service programs.
2. Items written in bold are modified service programs from the A161/A162
copiers.
3. A "†" after the mode name means that copies can be made while in this
SP mode.
4. A "‡" after the setting in the "Settings" column means that the actual
factory setting for this is written on the data sheet in the front cover.
5. A "°" before the mode number means that this mode can be accessed by
sales representatives (
#
→
$
→
#
→
#
).
6. A "
•
" before the mode number means that this mode can be accessed by
users using a UP mode (
#
→
$
). See "UP Mode/SP Mode Cross
Reference Table".
7. In the Function column, comments (extra information) are in italics.
8. In the Settings column, the default values are printed in bold letters.
9. "RDS" means Remote Diagnostic System (not available in these models)
"CSS" means Customer Support System (only available in Japan)
12.1.1 Quick Reference
The following is a quick reference list of the SP Modes.
Mode No.
Function
Paper Feed/Paper Transport/Fusing
1-001
Registration †
1-003-xxx
Paper Feed Timing †
1-008
Misfeed Detection †
1-103
Fusing Idling †
°1-104
Fusing Temperature Control †
1-105-xxx
Fusing Temperature Adjustments †
1-106-xxx
Fusing Temperature Display †
1-108
Forced Start †
1-801
Not used
1-902
Jogger Span Adjustment (Side Fence) †
1-905
Jogger Span Adjustment (End Fence) †
Around the Drum
2-001
Drum Charge Voltage Adjustment (for copying)
SERVICE PROGRAM MODE
13 October 1997
38
Summary of Contents for A212
Page 10: ...MEMO A212 A214 Copier 13 October 1997 MACHINE CONFIGURATION 7...
Page 82: ...COPIER ELECTRICAL COMPONENT LAYOUT 2 3 4 5 6 7 8 1 12 11 10 13 9 A212S500 wmf...
Page 84: ...42 43 44 45 46 47 49 50 51 53 56 57 58 64 63 62 61 60 59 48 52 55 54 A212S502 wmf...
Page 85: ...65 66 67 68 69 70 71 72 73 75 74 79 78 77 76 80 83 82 81 A212S503 wmf...
