ARTICULATED ARM OPENERS USER MANUAL
3
1.2.5 Emergency Release
1) Insert the release key to the release slot
2) Turn the release key anti-clockwise
3) Pull out the release bar
4) Turn the release key clockwise to fix the release bar, the release bar has to be in pulled out position when turning
the release key clockwise
5) Closed position adjustment :
5.1 After the full closed position decided, fix the corresponding mechanical stopper at the position.
5.2 After the full closed position decided, make the pointer on limit switch aligned with the pointer on the curved arm.
(Red points shown on the figure below indicate the pointers)
6) Opened position adjustment :
6.1 Adjust the gate to full opened position and after the position decided, fixe with corresponding mechanical stopper.
6.2 Adjust the gate to full opened position and after the position decided, make the pointer on the limit switch aligned with
the pointer on the curved arm. (Red points shown on the figure below indicate the pointers)
1.2.6 Wi
-
Fi Device
(Sold Separately)
Ports
P button:
Wi-Fi Paring: Press 1 sec
Default Setting: Press 3 sec
LED Display
If you want to switch WIFI AP, please press P button and follow Step 5. from App
Installation to reset.
• LED description:
Blue: LED will be flashing during WIFI pairing, and be ON when completed.
Green: LED will be flashing if WiFi box receives signal from APP.
If your home WIFI disconnects, the green light will continuously flash, and
it will be off until WIFI is connected again.
Red: System failure or wrong PIN.
