GTR181 Electric Lock Manual
Rev 1
Important Information:
1. Before you install the Electric Lock please be sure the gate is level, moves freely, and does not
bind or block against barriers
2. For the Electric Lock to work correctly, the gate must close firmly engaging the lock catch against
the lock receiver.
3. The Electric Lock must be installed on the outside of the gate if the gate is
Push-to-Open
.
4. Due to the various mounting conditions, mounting hardware is not provided. Read this manual
carefully to determine the mounting hardware required for your condition.
5. For dual gate, the lock must be installed on the Master Gate (gate 1) which is near the Control Box,
and the lock receiver must be installed on the Slave Gate (gate 2).
(If the gate near the control box has been set up as slave gate, you can change the settings following
User's Manual for your gate automation kit)
.
6. For a single gate, the lock operates best when the gate has a firm stopper or post to close against.
This reduces the impact damage to the lock.
7. For a dual gate, we recommend a
ground stopper
be fitted so that (at minimum) the receiver gate
closes firmly with no movement. This gives the electric lock a stable contact area.
8. Avoid using self-tapping fasteners as they are prone to loosening with vibration.
