GTR099 swing gate opener manual – Revision 22
11
Push-to-Open Installation — Gate in Closed position (Moving-Rod is retracted)
1.
Insert the M10 x 30 bolt
through the centre hole of the
post bracket and post pivot
bracket as shown. Place a
￠
10
washer,
￠
10 lock washer and
M10 nut on the bottom of the
bolt and hand tighten.
2.
Attach the gate bracket and
post bracket assembly to the
opener by inserting a clevis pin.
Secure the clevis pins using the
hairpin clips.
