TheraTouch® CX2/CX4/EX4
43
EMC TABLE
EMC DETAILS
Medical electrical devices such as the
TheraTouch® are subject to special
precautions with regard to electromagnetic
compatibility (EMC) and must be installed
and commissioned in accordance with the
EMC advice given in the instructions for
use and accompanying documents.
Portable and mobile RF communication
systems (e.g. mobile phones) may cause
interference with the TheraTouch®.
The TheraTouch® should only be operated
with the original power cord specified in
the list of contents delivered.
Operating the device with any other
power cord can lead to increased emissions
or reduced interference immunity of the
device.
GUIDELINES AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC
INTERFERENCE
The TheraTouch® device is intended for operation in an electromagnetic environment as
indicated below. The customer or user of the TheraTouch® unit should ensure that it is
operated in such an environment.
Interference Tests
Conformity
Electromagnetic Environment Guideline
RF emissions
according
to CISPR 11
Group 1
The TheraTouch® device uses RF energy solely
for its internal functioning. Its RF emission is
therefore very low and it is unlikely that this will
cause interference to neighboring electronic
TheraTouch® Professional Series.
RF emissions
according to CISPR 11
Class A
The TheraTouch® CX4 device is suitable for use
in all establishments other than domestic and
those directly connected to a low voltage power
supply network which supplies buildings used for
domestic purposes.
Harmonic emissions
according to IEC
61000-3-2
Class A
Voltage fluctuation
emissions and flicker
according to IEC
61000-3-3
Conforms
The device should not be used when placed immediately next to or stacked on top
of other devices. If operation is necessary when immediately next to or stacked on top
of other devices, the device should be monitored to ensure it is operating as intended
in this arrangement.
