• Open the lid of the grill. Make sure that gas valve knobs are in the
OFF
position.
• Open the valve of the gas cylinder.
• Keep your face and body as far away from the grill as possible while igniting.
• Push and turn the valve knob to the IGNITE/HI position, press the valve knob down, until you hear a
click. Repeat 3 or 4 times until the burner lights.
• If the grill does not ignite right away, wait for 5 minutes to give the gas time to disperse.
• After the burner has been ignited, ignite the other burner using the valve knob. Push each one and set it
to
the IGNITE/HI position to ignite it. All burners can be used together or in any preferable combination.
• Adjust the heat by turning the valve knob(s) between LO and IGNITE/HI position.
16
ITM. / ART. 966690
RM20-2SS Traveler Grill
Operating instructions Warning
Set Up
• This gas grill is only intended for outdoor use. Place the grill in a well-ventilated location.
• Make sure that there are no flammable objects near or over the grill, Keep the gas grill at least
4.9
ft. / 1.
5
m
away
from flammable objects.
• Do not place the grill under a pavilion, sun umbrella or similar objects.
Burn-off Procedure
• Before using the gas grill for the first time, burn-off residues of foreign matter remaining from the
manufacturing process.
• With hood open, operate the gas grill at high temperature about 10-15
min
utes
(See Igniting the Grill)
• After all residues are burned, turn off the unit, allow it to cool down and clean (See Cleaning and Care)
Igniting The Grill
08/2
8
/13
Please note that if burner flames are accidently extinguished, turn off all valve knobs to the off
position, open hood to vent the remaining gas, close the valve of the gas cylinder and allow 5
minutes to give the gas time disperse. After 5 minutes, repeat the igniting of the grill process.
15