ITM. / ART. 966690
RM20-2SS Traveler Grill
Regulator & Hose Instructions, Gas Tank Instructions
Gas Installation
Correct LP Gas Tank Use
•
LP gas grill models are designed for use with a standard 20 lb. (9.1kg) Liquid Propane Gas (LP Gas) tank, which is
not included with the grill. Never connect your gas grill to an LP gas tank that exceeds this capacity. A tank of
approximately 12 in. (305mm) in diameter by 18-1/2 in. (472mm) high is the maximum size LP gas tank to use. You
must use an
“
OPD
”
gas tank which offers a listed Overfill Prevention Device. This safety feature prevents tanks
from being overfilled which can cause malfunction of the LP gas tank, regulator and grill.
•
The LP gas tank must be constructed and marked in accordance with the Specifications for LP-Gas Cylinders of the
U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders,
Spheres and Tubes for Transportation of Dangerous Goods and Commission, as applicable.
•
The LP gas tank must have a shutoff valve terminating in an LP gas supply tank valve outlet that is compatible
with a Type 1 tank connection device. The LP gas tank must also have a safety relief or release device that has a
direct connection with the vapor space of the tank. When the appliance is not in use, the gas must be turned off
at the supply tank.
•
The tank supply system must have a means for vapor withdrawal.
•
The LP gas tank used must have a collar to protect the tank valve.
•
Never
connect an unregulated LP gas tank to your gas grill. The gas regulator assembly supplied with your gas
grill is adjusted to have an outlet pressure of 11 in. water column (W.C.) / 27.9cm water column (W.C.) for
connection to an LP gas tank. Only use the regulator and hose assembly supplied with your gas grill.
Replacement regulators and hose assemblies must be those specified by RICHMAN Grills.
•
Have your LP Gas dealer check the release valve after every filling to ensure it remains free of defects.
•
Always keep the LP gas tank in an upright position. Do not subject the LP gas tank to excessive heat.
•
To properly store your LP gas tank, place the dust cap on cylinder valve outlet whenever the cylinder is not in use.
Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. other types of
caps or plugs may result in leakage of propane.
•
Storage of an appliance indoors is permissible only if the LP gas tank is disconnected and removed from the appliance.
•
Disconnected LP gas tanks must be stored outdoors out of reach of children and must not be stored in a building,
garage, or any other enclosed area.
•
The regulator and hose assembly must be inspected before each use of the grill. If there is excessive abrasion or
wear or if the hose is cut, it must be replaced prior to using the grill again.
•
Never
light your gas grill with the lid closed or before checking to ensure the burner tubes are fully seated over the
11
08/28/13
gas valve orifices.
WARNING
:
Always operate the grill on a tabletop, no higher
than 32 inches. Place the propane tank on the ground
immediately adjacent to the tabletop, no further than 24
inches from the grill. Failure to follow these instructions
could cause the propane tank to overheat and vent propane
which can possibly ignite resulting in serious personal
injuries or property damage, or a tripping hazard over the
hose
or propane tank, pulling the grill off the tabletop
resulting in serious personal injuries or property damage.
10