Richenpower Y25 AG Drone
User Manual
12
©
2022 Richenpower Copy Right
1. Before the first flight, please read the following instructions about the remote control and
APP in detail.
2. Outline target field, obstacles. Mapping device is
recommended to measure.
3.
Login on App by taping the upper left corner icon.
4.
Switch on the aircraft and connect to App.
5. Tap
icon to select a field from list. And import
the automatically produced filght routes to Y10 for operation.
6.
Press to start ONLY when both LED is solid green or flashing green (picture above)
7. Monitor if any warning symbol is lighted on top of App. Confirm the number of satellites is
greater than 25 3D or 13 RTK. Confirm the Terrain radar is on and height shows 0.3~0.4
meter. (RTK is centimeter positioning based on US GPS system out of China and Beidou
system within China. Additional RTK BASE/MAP devices are required to work out of
China.)
Make sure no warning sign displayed on screen.
Tap the
‘Takeoff’ button to automatically take off or manually start the motors by
Combination Stick Commend (CSC) in the remote control. The default take-off hover
height is ‘1.5 meters’ from the ground.
Starting the motor CSC
8.
Switch the ‘Flight Mode’ to ‘Route Planning’, the aircraft enters the autonomous
operation mode and pushes the throttle stick to the ideal flying height.
9. The aircraft hovers after the operation was compl
eted. Press the ‘Return’
button
or tap
‘Return’ on the APP. The aircraft will rise 1 meter and return
automatically. The obstacles avoid in flight route does NOT work during RTH (Return to
Home), please pay attention to the aircraft at all times, and be pr
epared to switch ‘Flight
Flight Operation
