Setup
© Rice Lake Weighing Systems
●
All Rights Reserved
5
2.0
Setup
2.1
Unpacking
Carefully take the scale out of its package. Make sure there is no damage and all accessories are included.
• Remove the scale from the carton
• Remove the protective covering
• Inspect the scale and upper display (pole type only) for damage
• Make sure all components are included
If any parts were damaged in shipment, notify Rice Lake Weighing Systems and the shipper immediately.
2.1.1
Components
Figure 2-1. RS-130/RS-160 Scale Components (RS-130 shown)
• Scale
• Pan
• Power cord
• Pole (pole type only)
• Upper display (pole type only)
2.2
Leveling the Scale
Figure 2-2. Level Bubble
1. Place the scale on a flat level surface.
2. Check the level bubble in the lower left corner of the front panel.
3. Adjust the four corner feet until the scale is level and all feet contact the support surface so the scale does not rock.
4. Lock the jam nuts on the feet when the final level is correct.
Pole Type Scale (RS-130 shown)
Pan
Scale
Pole
Upper
Display
