RS-130/RS-160 Price Computing Retail Scale
6
Visit our website
2.3
Assemble Pole Type Scale
The pole type scale requires assembly as follows:
Figure 2-3. Pole Type Scale Assembly
1. Place the scale on a flat level surface.
2. Loosen the nut where the pole goes into the base.
3. Thread the cable through the pole.
4. Place the pole into the opening and tighten the nut securely.
Figure 2-4. Connect and Mount Display
5. Carefully open the upper display by snapping the two sides apart.
6. Plug the cable into the display board.
7. Snap the two sides back together.
8. Remove the screws from the upper part of the pole and slide the display onto the pole.
9. Secure by reinstalling the screws.
10. Level the scale, see
2.4
Power Scale
To turn on the scale, toggle the On/Off switch located on the bottom, right side of the scale.
Figure 2-5. Power Switch
Pole
Nut
Display
Screws
Cable
Open display
Plug in cable
Secure
Display
