Rice Lake RS-130, Operation Manual

Page: 13 / 18

Operation
© Rice Lake Weighing Systems ● All Rights Reserved 9
3.3.2 Using a Container
When using a package/container to weigh product:
1. Place the empty package/container to be used on the platter. The weight of the container displays.
2. Press
TARE
. 0.00 displays and the arrows are above ZERO and NET.
Figure 3-4. Tare a Package/Container
Note
Do not remove the weight until the memory finishes saving.
3.3.3 Keyboard Tare
Note
This feature is only available on SN B00551 and higher
In Gross mode, place item on scale.
1. Use the keyboard to enter the tare weight.
2. Press
TARE
.
Example: with a tare of 61, 0.61 NET displays.
3.4 M1 – M9 Keys
There are nine memory keys available to save UNIT PRICE
,
TARE WEIGHT and UNIT OF MEASURE values.
Figure 3-5. Memory Keys
1. Choose the UNIT of MEASURE, see Section 3.2 on page 8 .
2. Enter the TARE WEIGHT, see Section 3.3 on page 8 .
3. Use the numeric keypad to enter the UNIT PRICE $.
4. Press and hold one of the M keys until the scale beeps.
Note
Do not remove the weight until the memory finishes saving.
3.4.1 Weighing Product Using M Keys
1. Press the programmed M key (M1-M9).
2. Place product on the scale.
• WEIGHT displays weight of product.
• UNIT PRICE $ displays unit price and arrows flash above selected unit (kg, lb, oz).
• TOTAL $ displays the total cost of product being weighed.
To change the setting of one of the memory keys, follow the steps in Section 3.4 .
NET ZERO
WEIGHT