Rice Lake RL-42TT, Operation Manual

Page: 21 / 32

Accessories 17
3.3.1 Using the CF Card
Always power off the printer before installing or removing the CF card from the card slot. The CF card cannot be
used for the printer’s external memory until it is formatted in FAT16. When the printer has detected that the CF
card is not formatted in FAT16, it will beep 3 times and the STATUS LED light will flash orange.
The
RL-42TT
printer supports CF capacities from 128MB to 1GB. The
RL-42TT
printer can format the CF card
(which will erase all data on the card) in the proper format. If you choose not to format the CF card, open the top
cover and wait for the turn-on procedure. To format the card in FAT16 format:
1. Press the FEED key. The printer will format the CF card in FAT16.
2. When the format is complete, the LED light will turn green.
3. A file folder named “Godex” will be created automatically on the card. This folder is used for storing all
data from the printer. Do not rename or change the folder in any way.
4. Check the correspondent pins and
sockets to plug the adapter card onto the
main board.
NOTE: Make sure the sockets and pins match;
otherwise, the pins may get damaged.
5. Close the plastic cover to complete
installation.