manualshive.com logo in svg

Rice Lake MSI-8000, Technical Manual

Share
Download
Rice Lake MSI-8000 Technical Manual Download Page 6

MSI TranSend 7000 Series

2

Visit our website 

www.RiceLake.com

1.2 Standard Features

• Works with any basic digital weight indicator
• Excitation to load cell(s) provided by the transmitter, not the indicator
• Each transmitter/receiver set is individually paired for communication
• Auto-sleep mode - power down during non-use, power up with weight change
• Serial communication cable included

Additional HD Features

• IP68 milled aluminum enclosure
• 2nd radio modem available (MSI-7000HD only)

1.3 Safety

Safety Signal Definitions:

Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Includes 

hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death. Includes 

hazards that are exposed when guards are removed.

  Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury.

Indicates information about procedures that, if not observed, could result in damage to equipment or corruption 

to and loss of data.

General Safety

Do not operate or work on this equipment unless this manual has been read and all instructions are understood. 

Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake 

Weighing Systems dealer for replacement manuals. 

Failure to heed could result in serious injury or death.

Do not allow minors (children) or inexperienced persons to operate this unit.
Do not stand near a load being lifted as it is a potential falling hazard. Keep a safe distance.
Do not use for purposes other then weight taking or dynamic load monitoring.
Do not use any load bearing component that is worn beyond five percent of the original dimension.
Do not use any associated lifting product if any of the load bearing components are cracked, deformed or show signs of fatigue.
Do not exceed the rated load limit of the associated scale/dynamometer unit, rigging element or the lifting structure.
Do not allow multi-point contact with the hook, shackle or lifting eye of the associated scale/Dynamometer unit.
Do not allow high torque on the scale/dynamometer unless it is specifically designed for high torque.
Do not make alterations or modifications to the unit or associated load bearing devices; any alterations void the warranty. 
Do not remove or obscure warning labels.
There are no user serviceable parts. Any repairs are to be performed by qualified service personnel only. 

DANGER

WARNING

CAUTION

IMPORTANT

WARNING

Summary of Contents for MSI-8000



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands