Introduction
© Rice Lake Weighing Systems
●
All Rights Reserved
1
1.0
Introduction
The DHH-10/DHH-10BT is efficiently designed to provide accurate, reliable and repeatable
weight measurements.
Manuals and additional resources are available on the Rice Lake Weighing Systems
website at
www.ricelake.com
Warranty information can be found on the website at
1.1 Safety
Safety Signal Definitions:
Indicates an imminently hazardous situation that, if not avoided, will result in
death or serious injury. Includes hazards that are exposed when guards are
removed.
Indicates a potentially hazardous situation that, if not avoided could result in
serious injury or death. Includes hazards that are exposed when guards are
removed.
Indicates a potentially hazardous situation that, if not avoided, could result in
minor or moderate injury.
Indicates information about procedures that, if not observed, could result in
damage to equipment or corruption to and loss of data.
General Safety
Do not operate or work on this equipment unless this manual has been read and
all instructions are understood. Contact any Rice Lake Weighing Systems
dealer for replacement manuals.
Failure to heed may result in serious injury or death.
Do not transport the scale while someone is standing on it.
To avoid cross contamination, the scale should be cleaned regularly. Do not use chemical or
abrasive cleaning agents.
Avoid contact with excessive moisture.
Do not jump on the scale.
Do not place fingers into slots or possible pinch points.
Do not use in the presence of flammable materials.
Use the scale only to determine weight of people while standing.
Do not make alterations or modifications to the scale.
People with disabilities, or who are physically frail, should always be assisted by another person
when using this scale.
Do not use the scale on slippery surfaces, such as a wet floor.
Do not use this scale when the body/feet are wet, such as after taking a bath.
Weight exceeding the maximum capacity may damage the scale.
Do not drop the scale or subject it to violent shocks.
For accurate weighing, the scale must be placed on a flat, stable surface.
DANGER
WARNING
CAUTION
IMPORTANT
WARNING
