DHH-10/DHH-10BT
8
Visit our website
3.2.2 Wireless Scale Operation
1. To ensure accuracy, place the scale on a hard, flat surface. Make sure there are no
objects beneath the scale before weighing.
2. Make sure other smart devices in the area that also have the AccuroFit app installed
have Bluetooth turned
OFF
(the smart device closest to the scale will receive the new
weight measurement).
3. Open the AccuroFit app.
4. Press
My Body
to navigate to the
Weight
screen.
5. Enable Bluetooth in the settings of the smart device.
Ensure Bluetooth permissions are granted to the AccuroFit application and
Bluetooth is enabled on the smart device. Both can be found in the settings of the
smart device.
If Bluetooth is not enabled and if Bluetooth permissions are not granted to
AccuroFit, the smart device will not connect to AccuroFit.
6. Press
Connect To Scale
.
Figure 3-7. BLE Disabled
Figure 3-8. Bluetooth Enabled
This message only displays if Accurofit
is not granted Bluetooth permissions.
This example shows settings of an iOS device.
Settings vary depending on the smart device.
This setting must be enabled for the scale to be
able to send the weight data to the application.
Note
