Rice Lake BenchPro Series, Operation Manual

Page: 14 / 42

10 BenchPro Series Operation Manual
4. Press the service setup switch once to enter the service setting mode.
Service
Setup
Switch
5. Set service parameters.
6. Scroll to

once all parameters have been set.
7. Press to exit and save changes.
Parameter Settings Description

2%
5%
10%
20%
Semi Automatic Zero Set — the amount of weight (% of scale capacity) that can be zeroed from the
scale when the zero key is pressed

10%
20%
50%
Initial Power up Zero Setting — the amount of weight (% of scale capacity)that can be zeroed from
the scale upon power up; use if adding a unique weight platter instead of the factory supplied platter

0.25d
0.5d
1d
2d,
3d
Automatic zero tracking — scale returns to zeroweight using the selected multiplier based on the
division or resolution of the displayed weight; in non-approved applications, use this feature to return
the scale to zero weight if in a high vibration environment

Lo
Med
Hi
Filter — controls the weight display update rate; used if the weight displays is fluctuating in a high
vibration environment
Lo - faster update
Med - default
Hi - slower update

On
Off
Extended Mode — used for engineering testing; turn on this feature to increase the displayed
resolution by one decimal place

Off 1
Off 3
Off 5
Off 30
OFF
Auto Shutdown (battery mode only) — select the amount of time of inactivity after which the scale
automatically powers off
Off 1 — off after 1 minute of no use
Off 3 — off after 3 minuts of no use
Off 5 — off after 5 mintues of no use
Off 30 — off after 30 seconds of no use
Off — scale does not turn off

On
Auto
Off
Backlight Shutdown — conserves battery life; select the amount of time of inactivity after which the
backlight shuts off
On - always on
Auto - off after 5 seconds no activity
Off - always off
Table 3-2. Service Settings