160-10-7 Low-Profile Digital Physician Scale
4
Visit our website
www.RiceLake.com
2.3
Indicator
Use the following sections to install and setup the Rice Lake Indicator.
2.3.1
Load Cell Connections
The scale comes with 10' of load cell cable; cable must be connected to the indicator.
To gain access to the load cell connection on the indicator:
1. Unscrew and remove the tilt stand bracket from the indicator.
Figure 2-2. Remove Tilt Stand
2. Remove the four back retaining screws
to
remove the back cover to the indicator.
Figure 2-3. Remove Back Cover
3. Plug the end of the load cell cable into the load cell connection. When it clicks the load cell cable is properly seated
into the connection.
Figure 2-4. Load Cell Connection Point
4. Reinstall the backplate and attach to the tilt stand.
Unscrew tilt stand
knobs and remove tilt
stand from indicator
Load Cell
Connection
Do not use this
connection for
Load Cells.
Summary of Contents for 160-10-7
Page 31: ......
