Rice Lake 160-10-7, Technical Instructions

Page: 16 / 32

160-10-7 Low-Profile Digital Physician Scale
12 Visit our website www.RiceLake.com
Figure 4-2. Battery Requests
4.3 Maintenance Protocol
Maintenance protocol commands are described in Table Table 4-4. .
4.4 USB Connection
The scale can be connected to a PC using a USB connection and a USB cable.
Always use medical grade isolators for USB and RJ45 when connected to non-medical equipment, or
when other medical equipment is connected to patient during procedure.
.
Figure 4-3. USB and RS-232 Connection Ports
Connecting software and downloads should be addressed by an IT professional, and can vary depending on the computer
platform used. Basic information on USB driver installation using Windows
®
is described in the following steps and serves only
as an example.
A USB driver can be downloaded from the Rice Lake Weighing Systems website at:
https://www.ricelake.com/resources/software-firmware
1. Click on Software.
Command Definition
R Reboot
V Firmware ID + development version
W Current weight
A Current AD
Z Zero the scale
F Show flash values (used for the first flash process)
L USB On/Off (not available on USB communication
Table 4-4. Maintenance Protocol Commands
Diagnose Battery Request Battery OK Response Battery Low Response
<ESC> ABAT <ESC> E
Diagnose battery
EOP
<SCALE> <PC>
direction of communication
<ESC> ZE4U <ESC> E
Battery is okay
(no errors)
EOP
<SCALE> <PC>
direction of communication
<ESC> ZE4L <ESC> E
Battery is very low
(Unstable)
EOP
IMPORTANT
USB
RS-232 Connection