21
OPERATION OF THE COMPACT POWER NOZZLE
Fig. 1
Fig. 2
Fig. 3
Turning On the Power Nozzle
The power nozzle can only be turned on if
the canister is also turned on. The canister
On/Off switch is located on the main body.
The power nozzle On/Off switch is located
on the handle. Simply press the switch
forward to engage the power nozzle.
Using the Power Nozzle
After turning on the canister and the power
nozzle, lower the wand by stepping on the
top of the power nozzle and pulling the wand
toward you (Fig. 1).
Removing and Inserting the Wand
Removing the wand from the power
nozzle allows you to use cleaning tools for
baseboard or ceiling cleaning. To do this,
first turn the power nozzle and canister off.
Then, press the wand release button and
pull the wand out (Fig. 2).
To reinsert the wand into the power nozzle,
turn the canister off and press the wand
back into the neck of the power nozzle. The
wand will then click into place.
Brushroll Jam Protection
Your power nozzle is equipped with a circuit
breaker safety system that protects it from a
jammed situation. Items that cause jammed
brushrolls include socks, excessive threads
and corners of area rugs.
If Your Power Nozzle Shuts Off:
• Turn off the vacuum cleaner and power
nozzle then unplug the power cord.
• Remove the object preventing the
brushroll from turning.
• Locate the circuit breaker button on the
back of the power nozzle and press it to
reset the breaker (Fig. 3).
If the nozzle shuts off again, repeat these
steps to correct the problem. If this does not
correct the problem, contact an Authorized
Riccar Retailer for further assistance.
